Updated thiết kế lot 1000, bỏ C166 (net antenna 4G), bổ sung lớp phủ solder mask cho đường mạch 50 Ohm, điều chỉnh lại vị trí 2 Mark Point. Chỉnh design Rule (Via là direct connect to Polygon, SMD pad và THT Pad là Relief Connect). Thêm text string information cho mạch.

CamBox_RV1106.PrjPcbStructure → CamBox_RV1106_lot_1000.PrjPcbStructure

@@ -1,16 +1,16 @@
-Record=TopLevelDocument|FileName=4G.SchDoc|SheetNumber=10
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=AUDIO.SchDoc|SheetNumber=5
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=Block_Diagram.SchDoc|SheetNumber=1
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CAMERA.SchDoc|SheetNumber=6
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CONN.SchDoc|SheetNumber=15
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CORE_RV1106.SchDoc|SheetNumber=3
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=ETH.SchDoc|SheetNumber=12
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=Function.SchDoc|SheetNumber=8
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=GPS.SchDoc|SheetNumber=11
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=INPUT.SchDoc|SheetNumber=13
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=MCU_RX130-140.SchDoc|SheetNumber=4
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=MECHANICALS.SchDoc|SheetNumber= 
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=OUTPUT.SchDoc|SheetNumber=14
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=POWER.SchDoc|SheetNumber=2
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=TF.SchDoc|SheetNumber=9
-Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=UART.SchDoc|SheetNumber=7
+Record=TopLevelDocument|FileName=4G.SchDoc|SheetNumber=10
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=AUDIO.SchDoc|SheetNumber=5
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=Block_Diagram.SchDoc|SheetNumber=1
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CAMERA.SchDoc|SheetNumber=6
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CONN.SchDoc|SheetNumber=15
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=CORE_RV1106.SchDoc|SheetNumber=3
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=ETH.SchDoc|SheetNumber=12
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=Function.SchDoc|SheetNumber=8
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=GPS.SchDoc|SheetNumber=11
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=INPUT.SchDoc|SheetNumber=13
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=MCU_RX130-140.SchDoc|SheetNumber=4
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=MECHANICALS.SchDoc|SheetNumber= 
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=OUTPUT.SchDoc|SheetNumber=14
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=POWER.SchDoc|SheetNumber=2
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=TF.SchDoc|SheetNumber=9
+Record=NoMainPathDocument|SourceDocument=4G.SchDoc|FileName=UART.SchDoc|SheetNumber=7

Project Outputs for CamBox_RV1106_lot_1000/Design Rule Check - CamBox_RV1106_lot_1000.drc

@@ -0,0 +1,78 @@
+Protel Design System Design Rule Check
+PCB File : D:\Works\Project_Altium\CAMBOX_RV1106\CamBox_RV1106_lot_1000.PcbDoc
+Date     : 7/20/2026
+Time     : 3:36:19 AM
+
+Processing Rule : Clearance Constraint (Gap=0.152mm) (InPolygon),(All)
+Rule Violations :0
+
+Processing Rule : Clearance Constraint (Gap=0.508mm) (InPoly),(InNetClass('ETH') or InNetClass('ETH_2') or InNetClass('AHD1_CSI') or InNetClass('SDCard') or InNetClass('USB') or InNetClass('ANT') or InNetClass('ANT_GPS'))
+Rule Violations :0
+
+Processing Rule : Clearance Constraint (Gap=0.152mm) (All),(InNetClass('All Nets'))
+Rule Violations :0
+
+Processing Rule : Clearance Constraint (Gap=0.2mm) (InPolygon),(InPolygon)
+Rule Violations :0
+
+Processing Rule : Clearance Constraint (Gap=0.152mm) (InNet('GND_EARTH')),(InNet('GND')or InNet('VBUS'))
+Rule Violations :0
+
+Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
+Rule Violations :0
+
+Processing Rule : Un-Routed Net Constraint ( (All) )
+Rule Violations :0
+
+Processing Rule : Modified Polygon (Allow modified: No), (Allow shelved: No)
+Rule Violations :0
+
+Processing Rule : Width Constraint (Min=0.076mm) (Max=0.508mm) (Preferred=0.156mm) (InNetClass('ANT') or InNetClass('ANT_GPS') or InNetClass('SDCard') or InNetClass('USIM'))
+Rule Violations :0
+
+Processing Rule : Width Constraint (Min=0.2mm) (Max=0.508mm) (Preferred=0.254mm) (All)
+Rule Violations :0
+
+Processing Rule : Power Plane Connect Rule(Relief Connect )(Expansion=0.152mm) (Conductor Width=0.25mm) (Air Gap=0.25mm) (Entries=4) (All)
+Rule Violations :0
+
+Processing Rule : Hole Size Constraint (Min=0.152mm) (Max=5.08mm) (All)
+Rule Violations :0
+
+Processing Rule : Hole To Hole Clearance (Gap=0.254mm) (All),(All)
+Rule Violations :0
+
+Processing Rule : Minimum Solder Mask Sliver (Gap=0.01mm) (All),(All)
+Rule Violations :0
+
+Processing Rule : Silk To Solder Mask (Clearance=0.01mm) (IsPad),(All)
+Rule Violations :0
+
+Processing Rule : Silk to Silk (Clearance=0.01mm) (All),(All)
+Rule Violations :0
+
+Processing Rule : Net Antennae (Tolerance=0mm) (All)
+Rule Violations :0
+
+Processing Rule : Matched Lengths(Tolerance=0.254mm) (InxSignalClass('xCSI'))
+Rule Violations :0
+
+Processing Rule : Matched Lengths(Tolerance=0.254mm) (InNetClass('ETH') or InNetClass('ETH_2'))
+Rule Violations :0
+
+Processing Rule : Matched Lengths(Tolerance=0.127mm) (InxSignalClass('xCSI'))
+Rule Violations :0
+
+Processing Rule : Matched Lengths(Tolerance=0.127mm) (InxSignalClass('SDMCC'))
+Rule Violations :0
+
+Processing Rule : Matched Lengths(Tolerance=0.127mm) (InNetClass('USB'))
+Rule Violations :0
+
+Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
+Rule Violations :0
+
+
+Violations Detected : 0
+Waived Violations : 0
+Time Elapsed        : 00:00:03

Project Outputs for CamBox_RV1106_lot_1000/Design Rule Check - CamBox_RV1106_lot_1000.html

@@ -0,0 +1,364 @@
+<html>
+<head>
+<META http-equiv="Content-Type" content="text/html">
+<style type="text/css">
+		h1, h2, h3, h4, h5, h6 {
+			font-family : segoe ui;
+			color : black;
+			background-color : #EDE7D9;
+			padding: 0.3em;
+		}
+
+		h1 {
+			font-size: 1.2em;
+		}		
+
+		h2 {
+			font-size: 1.2em;
+		}
+
+		body {
+			font-family : segoe ui;
+		}
+
+		td, th {
+			padding: 0.5em;
+			text-align : left;
+			width: 10em;
+		}
+		th {
+			background-color : #EEEEEE;
+
+		}
+		th.column1, td.column1 {
+			text-align: left;
+			width : auto;
+		}
+		table {
+			width : 100%;
+			font-size: 0.9em;
+		}
+
+		.DRC_summary_header {
+			padding-bottom : 0.1em;
+			border : 0px solid black;
+			width: 100%;
+			align: left;
+		}
+
+		.DRC_summary_header_col1,
+		.DRC_summary_header_col2, 
+		.DRC_summary_header_col3 {
+			color : black;
+			font-size:100%;
+			padding : 0em;
+			padding-top : 0.2em;
+			padding-bottom 0.2em;
+			border : 0px solid black;
+			vertical-align: top;
+			text-align: left;
+		}
+
+		.DRC_summary_header_col1 {
+			font-weight: bold;
+			width: 9em;
+		}
+
+		.DRC_summary_header_col2 {
+			width: 0.1em;
+		
+		}
+
+		.DRC_summary_header_col3 {
+			width : auto;
+		}
+
+		.header_holder {
+		    Width = 100%;
+		    border = 0px solid green;
+		    padding = 0;
+		}
+
+
+		.front_matter, .front_matter_column1, .front_matter_column2, .front_matter_column3
+		{
+			left : 0;
+			top : 0;
+			padding: 0em;
+			padding-top : 0.1em;
+			border : 0px solid black;
+			width : 100%;
+			vertical-align: top;
+			text-align: left;
+		}
+
+		.front_matter_column1 {
+			width : 8em;
+			font-weight: bold;
+		}
+
+		.front_matter_column2 {
+			width: 0.1em;
+		}
+
+		.front_matter_column3 {
+			width : auto;
+		}
+
+		.total_column1, .total_column {
+			font-weight : bold;
+		}
+		.total_column1 {
+			text-align : left;
+		}
+		.warning, .error {
+			color : red;
+			font-weight : bold;
+		}
+		tr.onmouseout_odd {
+			background-color : #white;
+		}
+		tr.onmouseout_even { 
+			background-color : #FAFAFA;
+		}
+		tr.onmouseover_odd, tr.onmouseover_even { 
+			background-color : #EEEEEE;
+		} 
+		a:link, a:visited, .q a:link,.q a:active,.q {
+			color: #21489e; 
+		}
+		a:link.callback, a:visited.callback { 
+			color: #21489e;
+		}
+		a:link.customize, a:visited.customize {
+			color: #C0C0C0;
+			position: absolute; 
+			right: 10px;
+		}	
+		p.contents_level1 {
+			font-weight : bold;
+			font-size : 110%;
+			margin : 0.5em;
+		}
+		p.contents_level2 {
+			position : relative;
+			left : 20px;
+			margin : 0.5em;
+		}
+	</style><script type="text/javascript">
+		function coordToMils(coord) {
+			var number = coord / 10000;
+			
+			if (number != number.toFixed(3))
+				number = number.toFixed(3);
+
+			return number + 'mil'
+		}
+
+		function coordToMM(coord) {
+			var number = 0.0254 * coord / 10000;
+			
+			if (number != number.toFixed(4))
+				number = number.toFixed(4);
+			
+			return number + 'mm'
+		}
+	
+		function convertCoord(coordNode, units) {
+			for (var i = 0; i < coordNode.childNodes.length; i++) {
+				coordNode.removeChild(coordNode.childNodes[i]);
+			}
+
+			var coord = coordNode.getAttribute('value');
+			if (coord != null) {
+				if (units == 'mm') {
+					textNode = document.createTextNode(coordToMM(coord));
+					coordNode.appendChild(textNode);
+				} else if (units == 'mil') {
+					textNode = document.createTextNode(coordToMils(coord));		
+					coordNode.appendChild(textNode);	
+				}
+			}
+		}
+	
+		function convertUnits(unitNode, units) {
+			for (var i = 0; i < unitNode.childNodes.length; i++) {
+				unitNode.removeChild(unitNode.childNodes[i]);		
+			}
+		
+			textNode = document.createTextNode(units); 
+			unitNode.appendChild(textNode);
+		}
+	
+		function changeUnits(radio_input, units) {
+			if (radio_input.checked) {
+			
+				var elements = document.getElementsByName('coordinate');
+				if (elements) {
+					for (var i = 0; i < elements.length; i++) {
+						convertCoord(elements[i], units);
+					}
+				}
+	
+				var elements = document.getElementsByName('units');
+				if (elements) {
+					for (var i = 0; i < elements.length; i++) {
+						convertUnits(elements[i], units);
+					}
+				}
+			}
+		}
+	</script><title>Design Rule Verification Report</title>
+</head>
+<body onload=""><img ALT="Altium" src="
+			file://C:\Users\Public\Documents\Altium\AD23\Templates\AD_logo.png
+		"><h1>Design Rule Verification Report</h1>
+<table class="header_holder">
+<td class="column1">
+<table class="front_matter">
+<tr class="front_matter">
+<td class="front_matter_column1">Date:</td>
+<td class="front_matter_column2"></td>
+<td class="front_matter_column3">7/20/2026</td>
+</tr>
+<tr class="front_matter">
+<td class="front_matter_column1">Time:</td>
+<td class="front_matter_column2"></td>
+<td class="front_matter_column3">3:36:19 AM</td>
+</tr>
+<tr class="front_matter">
+<td class="front_matter_column1">Elapsed Time:</td>
+<td class="front_matter_column2"></td>
+<td class="front_matter_column3">00:00:03</td>
+</tr>
+<tr class="front_matter">
+<td class="front_matter_column1">Filename:</td>
+<td class="front_matter_column2"></td>
+<td class="front_matter_column3"><a href="file:///D:\Works\Project_Altium\CAMBOX_RV1106\CamBox_RV1106_lot_1000.PcbDoc" class="file"><acronym title="D:\Works\Project_Altium\CAMBOX_RV1106\CamBox_RV1106_lot_1000.PcbDoc">D:\Works\Project_Altium\CAMBOX_RV1106\CamBox_RV1106_lot_1000.PcbDoc</acronym></a></td>
+</tr>
+</table>
+</td>
+<td class="column2">
+<table class="DRC_summary_header">
+<tr>
+<td class="DRC_summary_header_col1">Warnings:</td>
+<td class="DRC_summary_header_col2"></td>
+<td class="DRC_summary_header_col3">0</td></tr>
+<tr>
+<td class="DRC_summary_header_col1">Rule Violations:</td>
+<td class="DRC_summary_header_col2"></td>
+<td class="DRC_summary_header_col3">0</td></tr>
+</table>
+</td>
+</table><a name="IDRR5R01LHD45UHOSWCH0200ZQJFYP0WNU2XDJNLCS1MEOXJYMERLK"><h2>Summary</h2></a><table>
+<tr>
+<th class="column1">Warnings</th>
+<th class="column2">Count</th>
+</tr>
+<tr>
+<td style="font-weight : bold; text-align : right" class="column1">Total</td>
+<td style="font-weight : bold" class="column2">0</td>
+</tr>
+</table><br><table>
+<tr>
+<th class="column1">Rule Violations</th>
+<th class="column2">Count</th>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDTFB1E05O2MAVM4R1UC2TV0504UT2CINT0DYG1G0NPUHUUEUI53M">Clearance Constraint (Gap=0.152mm) (InPolygon),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#ID0YBSBPOILKSQFZAVPRSFIB5YZBR5D23MOWVESWDVIG2FB3XEEIJG">Clearance Constraint (Gap=0.508mm) (InPoly),(InNetClass('ETH') or InNetClass('ETH_2') or InNetClass('AHD1_CSI') or InNetClass('SDCard') or InNetClass('USB') or InNetClass('ANT') or InNetClass('ANT_GPS'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDU42QFJ5WYEQDQFBSFH402ZCOBEBXX1D0CMCHSLNNXFHAQHPQGGL">Clearance Constraint (Gap=0.152mm) (All),(InNetClass('All Nets'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDHSCSFTZFCD5YIUEGUCPTRG1QZLN3HLDTZ155VNLS5P4J5WUJ2HDD">Clearance Constraint (Gap=0.2mm) (InPolygon),(InPolygon)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#ID3EQ1WQAECLIJIRX0E4VXFXMPYMOKA5BRPSGFXRN1CWIC4JBLZMCB">Clearance Constraint (Gap=0.152mm) (InNet('GND_EARTH')),(InNet('GND')or InNet('VBUS'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDT3HVCLB0WTA5C5MCELJF0Y0QLMP52R33V4BCA3OPAX0STZTWAQSE">Short-Circuit Constraint (Allowed=No) (All),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDYBJOOW1PYSTOBD2VK5IA3QUKUHQJD3DDPWQUHQDHBA0TDZ3JIM4I">Un-Routed Net Constraint ( (All) )</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDE14OZIUQXMDBGX1LY34HPZ1WLDEJUA3TQU2TWJVY3XASXZPLOGK">Modified Polygon (Allow modified: No), (Allow shelved: No)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDX2IT1WL5JA5CG3UST0PMKRNODJRDBWDYMYIEPCBDONU45WCHJ35G">Width Constraint (Min=0.076mm) (Max=0.508mm) (Preferred=0.156mm) (InNetClass('ANT') or InNetClass('ANT_GPS') or InNetClass('SDCard') or InNetClass('USIM'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDSXN2ZQXBDF4PH1SCVP4UVGGIIDRQLLKQLEYGTVC1NEK5HU45JJCJ">Width Constraint (Min=0.2mm) (Max=0.508mm) (Preferred=0.254mm) (All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDDBAD11LRRANCDXQHUEWRB1RMUJ3UIFIZLO0FN4KNGYI2RTKVIRUP">Power Plane Connect Rule(Relief Connect )(Expansion=0.152mm) (Conductor Width=0.25mm) (Air Gap=0.25mm) (Entries=4) (All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDL53NMIP1CTRSPCAVSGTJQUT23CIRNT5WBWWA0OHKS2BHRCX2TFCJ">Hole Size Constraint (Min=0.152mm) (Max=5.08mm) (All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDUK0TUCJDHD4EMZYUVTIM5SOZ1I3LJ5042DVIEPCUYFZ4HAXWYJXD">Hole To Hole Clearance (Gap=0.254mm) (All),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDGFRXJWKNPPQAOQPEQPSAX04HUC0AKC2DUEABHDF1QQVOUG45TGJJ">Minimum Solder Mask Sliver (Gap=0.01mm) (All),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDUCHCBXKU1VR4MMEC1PLIZWMQEG4CNN5AM13JTTEXIOFW5NYO4NCJ">Silk To Solder Mask (Clearance=0.01mm) (IsPad),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDGGBK5532HV4IB3SJSNMICALAFR2BAXO2TGSIMPC3PQKS3ARR4JB">Silk to Silk (Clearance=0.01mm) (All),(All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDTRKRO2V1QZTMFCRHZDKIIMSUHION1HCRWMMGBGIN0EKXLIH3MB5G">Net Antennae (Tolerance=0mm) (All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDJKWOEFWWNEAGIQKDQVRFZ5OQJJMDSOGOLOCGEGANQUIAASNW3BK">Matched Lengths(Tolerance=0.254mm) (InxSignalClass('xCSI'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDQRPAJQPKIF0ONHEK5EKFLYOQOMYV2VZUBNPMQ5JCRLWFXGVVTN4E">Matched Lengths(Tolerance=0.254mm) (InNetClass('ETH') or InNetClass('ETH_2'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#ID1HUZR4JJKEJEDQOKIPQ0OYI04K1GCRO5Z5DDWUPNX100LPBAXYUN">Matched Lengths(Tolerance=0.127mm) (InxSignalClass('xCSI'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDPI4W0K3TWR53OTQQDDACDRR3XPGOFLMHR0DCJECFLCU54DDKKP3B">Matched Lengths(Tolerance=0.127mm) (InxSignalClass('SDMCC'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
+<td class="column1"><a href="#IDKE2DIZMUYSK2HLFJ3T40MXL55KGZEAFRGALED1PCICPPDI0T44IN">Matched Lengths(Tolerance=0.127mm) (InNetClass('USB'))</a></td>
+<td class="column2">0</td>
+</tr>
+<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
+<td class="column1"><a href="#IDBJ1DY1P5OAD1JUA1TZVU5WQYYHDEKUCBDEJJHVBNACV43D5GKVKG">Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)</a></td>
+<td class="column2">0</td>
+</tr>
+<tr>
+<td style="font-weight : bold; text-align : right" class="column1">Total</td>
+<td style="font-weight : bold" class="column2">0</td>
+</tr>
+</table><br></body>
+</html>